1. The machine is used for making roller, vertical, skylight, and soft sheer blinds.
2. The most advantages for products of ultrasonic is automatically banding and there will be parallel for both cutting side.
3.Adoping screen-touching and PLC to control , easy to operate, work steadly,highly efficient.
4. Adoping precise track to control the blades with automatically accouting function for fabrics.
5. Adoping germany technology of ultrasonic system, the cutting edge is smooth and without fading and falling off.
Packaging & Delivery
Packaging Detail: Normal export wooden case
Delivery Detail: within15 days after receiving the first down payment
1.Namely the machinisim that feed fabric to the cutting part,which is controlled by motor that is controlled by controlling core.you can change the feeding speed through GUI.
2.The horizontal position is adjusted by GUI,too,(See below “Movement test interface”).
3.There’s an “edge adjusting motor” on right side of feeding machinisim(The cutting edge may become in disorder with some unknown reasons). There’s an edge adjusting inductor inside,once the fabric horizontally moves,the inductor will get the signal and send it to PLC,then the PLC will give a signal out to make the “edge adjusting motor” work to avoid the movement. Adding a handing wheel on the left side of feeding frame is to adjust the parallel between feeding and collecting frame.
4.There is a dividing ruler on the left side of feeding frame. When you adjust handing roller and the dividing ruler shows 5.Theoretically speaking, feeding frame and collecting frame are paralleled.
6.Please keep clean of feeding bar in case the fabric may be dirty.