Excellent fabrics cutting machine for cutting and sealing fabric
1. Voltage: 220V/110V AC/60Hz
2. Rated Power: 2.2kw
3. Working pressure: 0.3-0.5 mpa
4. Available fabric cutting width: 3.2m, 4m
5. Over all size: 4.0m*1m*0.8m
6.packing size: 4.2m*1.2m*1.3m
Explanation of Working Process
1. Cut cloth: When the cutting button is pressed down (before cutting, ultrasonic and pressure blade are exchangeable), pressure plate goes down to compress the cloth tightly, the ultrasonic system is turned on, then the blade wheel is downward, the motor is on, and the blade starts to move. The machine can monitor the edge of cloth in cutting process, once the cutting is finished, or proceeding at the right limit, the motor slows down and stops, the ultrasonic system is turned off, the blade wheel goes up, and the cutter restores to the left limit, the pressure plate is uplifted, and the entire cutting is accomplished.
2. When pressing the emergent stop to close down in the cutting process, the pressure plate will go up automatically, the blade is stone-dead, or it will restore by turning on the power.
3. Turn on power: After turning on power, the machine will detect position of blade wheel automatically and restore to the left limit, if the machine can’t restore normally, it means the time from the last outage time is short.
1. Ultrasonic Blade and Cold Blade
(1) Ultrasonic blade: Ultrasonic horn is a core part of the ultrasonic system as well as a core part in cutting, after a long-term use, it must be abraded, accompanying with failure in cutting of cloth. However, this phenomenon can be eliminated by increasing pressure of the blade wheel properly, if the blade is over worn, it should be repaired, because overlarge pressure exerted on the blade wheel may cause the ultrasonic system failing to work. The ultrasonic horn has less wear even operating for a long term, because the part is subjecting to special treatments and has higher wear resistance and hardness. Only if a new blade replaced can’t work normally can the part be repaired by grinding the contact face with the blade wheel flatly.
(2) Cold blade: Cold blade rotates the blade to cut off cloth under pressure, when the pressure is lower than 0.4MPa, it can’t cut off the cloth, the pressure must be over 0.5MPa for cutting thick cloth, the blade has fast wear because it cuts off the fabric pneumatically, and it is necessary to maintain the cutting edge after excessive wear.
Website on Youtube
Multifunction fabric cutting machine
The ultrasonic system adopt Germany vibrates parts, frequency 20Khz, ultrasonic cutting fabric into a perfect edge seal,no burn mark or fray edge.
The crush cutting using rolling tape &crush cutting ,the blade holder could be adjusted blade with high resist wear advantage.
After sale services:
1. We have more than 7 years of experiences.
2. We are professional,we are manufacturing machineries for roller shades,roller blinds or fabric only.
3. We have great after-sale team, we are responsible for every customers and the machines we have sold.
4. We have strong technique team.
5. Our machines are well sold around all the world.
6. All machines have one year warranty.
7. Hunter Douglas is one of our largest customers.
8. With the support of new and old customers,our machines are gradually step by step upgraded, we aimed to help every customers with our best machines, because we assure " you get what you paid for"
Please contact us as soon as possible, we will recommend the suitable machines for you according to your request.